HomeHome ImprovementHow to Hang Shelves on a Brick Wall: Tips and Tricks

How to Hang Shelves on a Brick Wall: Tips and Tricks

Do you have a brick wall in your home and you don’t know what to do about mounting shelves? Don’t worry, we’re here to help! In this blog post, we will give you tips and tricks on how to hang shelves on a Floating shelves on brick wall. We’ll also provide some helpful resources that will make the process much easier for you. So whether you’re looking to add some extra storage space or just want to add a little decoration to your walls, read on for tips on how to hang shelves on a brick wall!

Hanging shelves on a brick wall can be a bit tricky. The key is to find the right anchors and screws that will grip the brick without damaging it. Here are a few tips and tricks to help you successfully hang shelves on a brick wall: 

  1. Start by finding the perfect spot for your shelves. Use a level to mark the spot where you want to drill your holes.
  2. Next, use a masonry drill bit to drill pilot holes into the marked spots. Be sure to wear safety goggles and a dust mask while drilling.
  3. Finally, insert masonry screws into the pilot holes and screw them tight. Your shelves should now be securely attached to the wall!

Brackets for the Brick Wall Shelf

Hanging shelves on a brick wall can seem like a daunting task, but with the right tips and tricks, it can be surprisingly easy. One of the most important things to consider is what type of brackets to use. For a brick wall shelf, metal brackets are usually the best option. They’re strong enough to support the weight of the shelf and its contents, and they’re not likely to damage the bricks. Another thing to keep in mind is that shelves should be hung at least 12 inches from the ground, so that they’re out of reach of small children. With these tips in mind, hanging shelves on a brick wall is a breeze!

Shelf over a Bricks without Drilling

Hanging shelves on a brick wall can be a bit tricky. Unlike drywall, brick is a lot harder to drill into and anchor screws. However, there are a few ways to hang shelves on a Hanging shelves on brick wall without drilling. One option is to use adhesive strips. These strips can be found at most home improvement stores and are specifically designed for hanging shelves on brick walls. Another option is to use brick clips. These clips attach to the bricks with small metal jaws and provide a place to hook the shelf brackets. Both of these options are relatively easy to install and don’t require any special tools or skills. Whichever method you choose, be sure to follow the instructions carefully to ensure that your shelves are securely attached to the wall.


If you’re looking for a more permanent solution, you can always drill into the brick. This is definitely the most difficult option, but it will provide the most support for your shelves. You’ll need to use masonry drill bits and anchors specifically designed for brick walls.

Hanging Shelf on Plaster-Coated Bricks

Hanging shelves on a brick wall can be a bit of a challenge, especially if the bricks are coated in plaster. One method to consider when hanging shelves on such a wall is to use mortar anchoring hooks. This process involves drilling holes into the appropriate spot on your wall and inserting the anchored hooks. Once the hooks have been securely installed, you can then attach your shelf using wire or screws without worrying about it falling down. Another option is to drill holes into your wall and install metal brackets designed specifically for use with brick walls. With either of these methods, it is important to take care when selecting the exact placement for your shelf so that it sits securely and looks aesthetically pleasing. Overall, whether you decide to use mortar anchors or metal brackets, hanging shelves on a brick wall can be an effective way to add extra storage space in any room of your home.

Must Read