Clogged drains are among the most frequent plumbing problems in your house or property. Blocked drains can be a huge hassle and result in significant damage, whether inside your restroom, kitchen, or the exterior section of the building.
There are numerous causes of the blocked stormwater drain in Sydney. The typical reasons are tree roots, pinhole leaks, garbage buildup, abandoned wipes, blocked drains, and other unwanted material. Whatever the cause, our blocked drain experts are on standby to look into and fix the issue.
Clogged storm water drains: what causes it?
Your property’s stormwater drains are subjected to a great deal of environmental strain and gather water from various sources. This implies that they are far more likely to experience issues like stormwater obstructions, which are brought on by a variety of causes, such as:
Tree roots: According to reports, invasive tree roots account for 95 per cent of drain blockages because they can access moisture and nutrients.
- Garden debris, including leaves, dirt, and other things.
- Pipes that are broken or have collapsed.
- Playthings and other trash.
Stormwater pipes can carry much water but cannot hold a lot of material buildup. This is why it’s crucial to maintain the cleanliness of your yard at all times, as an intense downpour may wash debris such as leaves and grass clippings into your runoffs and result in unintended drain blockages.
Tips for Cleaning clogged drains at Home
Cleaning a blocked stormwater drain in Sydney might require mild prodding to start functioning again. That’s why we’ve put together this practical advice on handling that annoying congested shower drain.
Plunging:
Plunging is always appropriate for showers, tubs, and sinks.
Always keep a plunger on hand in case a drain becomes clogged. It removes accumulation inside the p-trap or U-bend and can help minor blockages. If your sink is clogged, fill it halfway with hot water, and then carefully start pushing with the plunger. Drain the sink, and then give it another hot water rinse. Should use the plunger to seal the bowl with a toilet. Once the air is out, the plunger will close tightly, allowing you to keep pumping while upholding the seal. Continue until the obstruction has been removed.
Vinegar and baking soda:
Vinegar and baking soda are safe for showers, bathtubs, and sinks.
You pour boiling water through the clogged drain to unclog your sink. Next, pour a half cup of sodium bicarbonate (commonly known as baking soda or bicarbonate of soda down) into your drain and wait five minutes. Prepare your vinegar solution by combining 1 cup of vinegar with 1 cup of boiling water, then pour the mixture down the drain while you wait.
Unblocking u-traps:
It’s a standard sink solution.
The u-trap underneath the sink is one of the drains that gets clogged up the most frequently in Sydney homes. Place a bucket underneath the pipe before unscrewing the u-trap to drain the buildup. This is important when cleaning the u-trap. Reattach the trap and ensure it is firmly in place after properly washing the u-trap and the link lines.
Wet/dry vacuums can be used:
The vacuum also works as a wet/dry vacuum and removes liquids and dry dirt. Using these guys to remove waste from blocked drains is often necessary, especially when the blockage is high.
A plunger head placed over the hole works well as a seal over the plughole to prevent a mess. Using the vacuum’s liquid setting, place it over the plughole and turn it to the most powerful suction. Set the vacuum to 1 or 2 minutes and leave it on. Run the water gently until the sink is unblocked, then turn it off and turn it on again.
